1–888–588–8639 Brother Wireless Printer setup | How to connect Brother Printer to Wifi 2021
3 different ways to setup Brother Wireless Printer and some new ways to connect Brother Printer to Wifi.
Connecting a Brother printer to your computer or laptop is easy, but if you have a Brother wireless printer, it will be easier for you. Well, like other printers, Brother Printers also wants the configuration and access to printing. Without configuration, it would not be able to perform the print tasks on your operating system.
Choose the alternate power cord that comes with the Brother printer box and turn on the device. After that, turn on your computer or laptop whatever you use, then put the CD-ROM into the CD-ROM drive. Brother Wireless Printer setup If the CD-ROM drive is not available, then the installation will be done automatically via the Internet.
Before configuring, Assistance will give you the process of connecting Brother wireless printers:
Wireless Brother printer setup
- Before configuring the Brother printer, first, understand the wireless network (WLAN) access point/router setting.
- If your router is working properly, Brother Printer Wireless Setup will only use the WEP key. Here are the steps:
- Insert Compact Disc; then you will see the installation process on your screen, then select the printer model and language.
- You will see the CD-ROM menu that appears on the screen where you have to select Brother Printer Driver Install, click “YES” when the Control Account screen appears.
A few steps to configure the wireless configuration on the Brother printer machine.
- You must use the Brother Printer Wireless Configuration Control Panel.
- First, connect the AC power cable to your printer and turn on the printer.
- Press MENU.
- Press the up or down arrow key to choose the network setting / wireless configuration.
- Press the up or down arrow key to choose the network and press ok.
- Press the up or down arrow key to choose WLAN and press ok.
- Press the up or down arrow key to choose the configuration wizard and press ok.
- When Lan is on appears to activate the wireless network.
How to connect your Brother printer to WiFi:
It is very important to connect Brother Printer to WiFi because without an internet connection, you can configure the printer driver. And before you have the printer driver on your computer, you can’t print.
So, if you don’t know how to connect Brother Printer to Wifi to make a WiFi connection between setting up Brother Printer WiFi and your computer, simply take Help setting up your wifi printer. You will certainly know the whole method in the simplest form.
Whenever you connect your Brother printer to Wi-Fi, you can enjoy printing anywhere, even on your mobile. With the USB cable, Brother Printer can also be configured for a wireless network to take your computer to the network.
Before establishing a connection, you must have a password and network name. So keep these requirements in your hand so you can introduce them when you are asked to give up.
The following Brother Printer WiFi configurations are available:
Connect your Brother printer to WiFi: Wireless Direct
Wireless Direct will let you connect your printer to your computer or mobile device directly without a Wi-Fi router/access point; the printer works as a Wi-Fi hotspot.
Make sure the Wireless Direct settings of the printer. After you connect to a mobile device, use a Windows or Mac computer to confirm your settings.
For Windows PCs.
- Connect the printer and the computer with the USB cable. Open the printer setup tool on your computer and touch the communication settings button.
- Make sure that wireless addresses are selected for the selected Interface on the General tab. See the FAQ: “Using communication settings (for Windows)” for more information about communication settings.
For Mac computers
- Connect the printer and the computer with the USB cable. Open the Printer Setting Tool on your computer and confirm that Wireless Direct is set to On in the Wireless LAN tab. (This is selected as the factory default setting.)
- Click and hold the Wi-Fi button on the printer for one second to enable Wi-Fi.
- The Wi-Fi signal starts flashing blue every three seconds.
- Use your computer or mobile device to select the printer SSID.
- Once the connection is established, the Wi-Fi indicator lights up blue.
Connecting Brother to WiFi Printer: Infrastructure Mode
Infrastructure mode allows you to connect the printer to a computer or mobile device through a Wi-Fi router/access point. Before you begin, you must configure your printer’s Wi-Fi settings to communicate with your Wi-Fi hotshot/router. After configuring the printer, computers or mobile devices in your network will have access to the printer.
Connect your Brother printer to WiFi (install Brother printer)
First, enter the SSID (network name) and password (network key) of your Wi-Fi hotspot/router.
- Connect the printer and the computer using the USB cable.
- Press and hold the (Wi-Fi) button on the printer for one second to turn on the Wi-Fi function. The Wi-Fi signal starts flashing blue every three seconds.
- Configure the printer’s Infrastructure Mode settings.
- For Windows, PCs Open the printer setup tool on your computer and touch the communication settings button. Choose wireless LAN for the selected interface on the General tab and select Infrastructure for communication mode in Wireless settings on the wireless LAN tab.
For Mac computers
Open the wireless device setup device included in the printer driver package, and then follow the on-screen instructions.
- If you have not downloaded the printer driver package yet, go to the Downloads page to download the package. Double-click the downloaded file. The Wireless Device Configuration Wizard can be found in the Utility folder.
- Type the SSID you have noted or click Search and select the SSID from the list displayed.
- Enter your password as your password.
- Click Apply Once the connection between the Brother printer and your Wi-Fi access router is set up, the Wi-Fi sign lights up blue. Computers and mobile devices on the same network as the printer will have access to the printer.
Simple steps to connect your Brother printer to a WIFI network
Connect your Brother printer to WiFi
- You will need the password and network name for the wireless network (this can usually be found behind the modem).
- Make sure your printer and computer are turned on Set up your WIFI connection.
- Select the menu button (if you have a touch screen, select Settings or the Spanner Screwdriver icon, then select All settings
- Using the arrow keys, scroll to the Network, then press OK Select W-LAN Using the arrow keys, scroll down and choose the Setup Wizard Press OK.
- Select the WIFI network (if you are prompted to use WPS you can select NO) Enter the WIFI password, then press OK You will be prompted to apply settings
- Press 1 to select YES If your password is correct, a message will read the connected connection, the report will be printed automatically.
